| |
 |
 |
 |
| |
LNS Driver Fact Sheet |
|
|
Driver
Name : |
Lonworks
Network Interface |
Driver
Code : |
LNS |
Device
Mfr : |
Echelon
Corporation and Distech Corporation |
Driver
Vendor : |
GE-Fanuc
Automation |
Last
Updated : |
10/23/2003 |
|
|
|
Version |
Platform |
Version |
Type |
Media |
Available |
SCADA
Support |
Windows NT |
7.20b |
COMM, NET and RES |
Disk |
Yes |
FIX32/iFIX |
Windows 2000 |
7.20b |
COMM, NET and RES |
Disk |
Yes |
FIX32/iFIX |
Windows XP |
7.20b |
COMM, NET and RES |
Disk |
Yes |
FIX32/iFIX |
|
| |
Devices Supported |
Mfr |
Devices |
Comments |
Distech
Controls |
EC-12,
EC-8, EC-4, EC-Display, EC-FC,
EC-RTU, ECU-88, EC-VAV |
- |
Echelon |
Any
LonPoint device |
- |
Echelon |
i.LON1000 |
Internet
Server |
Echelon |
PCC-10 |
Type
II PC card in laptop (formerly
PCMCIA) |
Echelon |
PCLTA-10
or PCLTA-20 |
PC
LonTalk Adapter. Type of resident
card in PC |
Echelon |
SLTA |
Serial
LonTalk Adapter |
|
| |
Data Types |
Data
Type |
Comments |
ASCII |
Printable
Text |
Float |
32
bit floating point |
Long |
Signed
32 bit Integer |
Signed |
Signed
16 bit Integer |
Unsigned |
Unsigned
16 bit Integer |
|
| |
Signal Conditioning |
Signal
Type |
Description |
Comments |
NONE |
No Signaling |
- |
|
| |
Comments |
| Additional
Software Requirement:
Echelon LonMaker for Windows v 3 or higher.
Relevant Notes:
Once the Lonwork Network is configured
and commissioned, the LNS driver will
communicate with the LNS database and
can update all the required network variables.
It is not necessary to run the Lonmaker
for windows software for execution of
LNS driver. The LonMaker for Windows Version3.0.is
required only to configure and commission
the Lonwork Network.
The Driver Version supports the following
types of Lonworks Network Variables:
1. Structured Variables (for example:
SNVT_switch)
2. SNVT format variables (Standard Network
Variable Types)
3. UNVT format variables (User Defined
Variable Types)
4. SCPT (Standard Configuration Property
Types) variables and UCPT (User Configuration
Property Types) variables.
The LNS driver supports the Exception
based processing feature for Analog and
Digital I/O's to further improve the performance
of the driver. To implement this feature
for analog inputs, the Lonwork devices
need to get configured with Dead band
feature through Neuron C program. If the
dead band feature is configured for analog
devices then the exception based processing
can be used for these devices.
This driver supports the following Distech
point types and only apply when communicating
to a Distech device.
1. Constants (Mode only)
2. Variable (Mode and Value)
3. Input (Mode and Value)
4. Output (Mode and Value)
5. Schedule State (Mode and Value)
6. Schedule On/Off Time
7. Holiday On/Off Time
8. Holiday Schedule
9. Device Time
|
| |
Contact
Details :
Sarla Technologies
403/404, Bldg No. 2, Sector - 1,
Millennium Business Park,
Mahape, Navi Mumbai - 400 701,
Maharashtra, INDIA
Tel : 91 22 2778 2979
Fax : 91 22 2778 1059
E-mail : sales@sarlatech.com |
|
|
|
 |
 |
 |
|
|
|
|
|
